AISLER

I've made something similar before, but this time I'm getting a custom inner and outer shield made thanks @aisler.net (NNNI26 for €10 off till the end of this year, plus coupon works across multiple orders!)

Southampton's Formula Student team built their own race car dashboard. It runs at a "buttery" smooth 60 Hz, thanks to external SDRAM & a length-matched 6-layer layout.🧡 Full write-up in our community: community.aisler.net/t/sufst-cust... #FormulaStudent #PCBDesign

this unusual experiment from @aisler.net is yet another PCB capacitor - the outer layers form the driven plate which shields the inner plate formed by the inner layers from interference! (NNNI26 for €10 off similar sketchy experiments!)

@aisler.net actually managed these super thin guard traces! I used KiCAD's solder mask expansion to create them! (NNNI26 for €10 off this year on all Aisler orders!)

Ordered custom designed PCB's on a Wednesday, delivered on a Saturday. New record for @aisler.net 👍

Last week, the European Solar Challenge took place, the only 24h solar race in the world! ☀️ Among the participating teams were some of the teams we’ve sponsored. Are you in a student team and looking for a PCB sponsorship? Don’t hesitate to reach out to us! 🧡 #technology #hardware

first project is a dielectric tester designed by a friend! the idea here is to sandwich a dielectric between the exposed copper plates with a fixed distance between them, and measure using an LCR meter at various frequencies! thanks @aisler.net

the next one is something I've been looking forward to for a while, an open-source DSOXLAN board! github.com/aewallin/DSO... thanks @aisler.net !!! (NNNI26 for €10 off this year!)

I've been gone for 3 weeks and I got no less than SIX packages from @aisler.net ! contents will be revealed over the coming days

For their second revision, team Campus Tirol Motorsport has combined all four inverter power modules on one shared PCB. This saves them 20% of space compared to their previous arrangement! Want to know how they've designed this? Check out their recent post in our community! 🧡 #technology #hardware

Just placed another order with @aisler.net. Quick turn low-volume PCB's like oshpark, but in Europe. So no customs hassle! €10 coupon on me: MakeInEurope-KYHFS

After the manufacturing phase, team TUG racing has been testing their new racing car since May!🏎️ One of the issues that they discovered were burnt traces on the shutdown driver. Read how they’ve solved this issue in their newest community post!🧡 #technology #hardware

Aerospace Team Graz has developed 85 PCB's for their ISPIDA rocket. They highlight a few critical ones in their new article, such as the main flight computer, the black box and the recovery interface. Check it out to learn more about their electronics! 🧡 #technology #hardware #rocketry

Team JKU Racing has shared their learnings on managing a shared component library in our community! 🧡 One of their recommendations is to use life cycle states to show if components have been tested on real hardware. What are your tips on managing your component library? #technology #hardware

A locomotive with CAN-based electronic architecture, custom PCBs and a self-developed standard to integrate new modules. 🚄 That's what team Loc.KA engineering is developing for the European Railway Challenge! Want to know more about their project? Check it out here! 🧡 #technology #hardware

Anyone here, who'd like to visit the Maker Faire Hannover this weekend and doesn't have a ticket yet? Please drop me a pm 🧡

It's International Cat Day, on a Saturday. Cat tax below. 😻 Cats are responsible for a lot of hardware. Automatic feeders, flaps that open for one registered chip. Litter trays on a load cell, LED ear headbands, ... What have you built for a cat that made it to a manufactured board?

Team Solaride has developed a new communications PCB for their solar car. They designed a four-layer PCB in Altium, with an ESP32-S3 and two audio codecs with built-in ADCs and DACs. Want to know the specifics of their project? Read their latest post in our community! 🧡 #hardware #technology

New PCB from @aisler.net. Had to flatten the stencil first (thanks DHL premium), but it soldered fine in the end. Now to test if everything works using it with the 360x360 qspi display.

I got this beautiful board manufactured by @aisler.net! So, now let's move on to the assembly process!

Solar Team Eindhoven has presented their new project, Stella Juva: The world's first solar-powered ambulance! 🚑 They have developed a completely new electrical system for this project. Read all about it in their latest post in our community! 🧡 #technology #hardware

In Part 3 of our KiCad series with #ThatKiCadGuy you learn how to put your KiCad library under Git & share it with your team. init → commit → push. 😎 ▶ youtu.be/5MHF84NF_lI We're looking forward to your feedback on the series! 🧡 #KiCad #Git #OpenHardware

Team ROCKIT from Karlsruhe has been developing a new Engine Control Unit, a modular system consisting of three boards all with their own function. They are all connected to a board that handles data routing and power distribution. Read all about it in our community! 🧡 #technology #hardware

Team Aetherspace is making returning experiments from space more accessible through their T-Rex project. Want to know how they've faced unique challenges such as thermal management in near vacuum conditions, or robustness for 20g launch loads? Read their new community post! 🧡 #technology #hardware

Today is France's Fête Nationale. Not our holiday, but a good day to celebrate with you. 🧡 So we're marking the day with you. Small gift to go with it: code FeteNationale26, €10 off Beautiful Boards or Amazing Assembly. One use per account, valid until 31/07/2026. #PCB #Electronics #MadeInEurope

Half of all PCB Design-pain starts in the library. 🥲 New 3-part series with Petr Dvořák (#ThatKiCadGuy). Part 1: global vs. project-specific libraries + drawing a custom symbol (a 3-phase bridge rectifier) from a datasheet with the AISLER Lovely Library. ▶ youtu.be/fmwMzdV9XGk Free & CC-BY-SA:

Because team HyDriven's formula student car is powered by hydrogen, safety is of the utmost importance. Therefore, they've designed a fully analog Hydrogen Safety Circuit that continuously measures critical values. You can read about their design choices in their post in our community! 🧡

Winning formula student races is not just about speed, but also about reliability! 🏎️ Team TUG Racing has been working hard to make their car as reliable as possible. Want to know how? Read their article in our community! 🧡 #technology #hardware

RIP the €150 duty-free parcel. Now it's a flat €3 per tariff heading (not per parcel!). No pre-clearance? The carrier fronts it and catches you at the door. DHL's fee: €7.50 extra. 🙃 Good news: There's nothing to charge if it never leaves EU. 🇪🇺 Your AISLER orders are not affected. 🧡 #PCB #MadeInEu

so not labelling the parts was a mistake, and making a test board as dense as the final product is always a mistake, so I added more test points! (boards from @aisler.net, NNNI26 for €10 off year-round, multiple times!)

To study how liquids move through passive valves, team Capilux is designing an experiment for the Rexus-Bexus programme. The brain of their experiment is their mainboard, a 4-layer PCB that controls all the main processes. You can read all about it in their community post! 🧡 #technology #hardware

Important notice regarding the current weather: Watch your operating temperature! Drink plenty of water and don't exceed your absolute maximum ratings. 🥵

A group of students from ETH Zürich is working on project Equilibrio. They aim to build a one-wheeled robotic platform that has to actively stabilize itself, a complex process to design! Curious to their project? Check out their posts in our community! 🧡 #technology #hardware

This is the Raspberry Pi CM4S carrier that I designed during the KiCad Live Stream sessions. I made a few mistakes. The biggest I've identified so far is that the HDMI is too close to both sideways USB Type-C ports. That's a big issue because you can't plug the standard HDMI cable into it.

Team Robotik UTT has recently competed in the French Robotics Cup. For the electronics they have used a TDK Lambda regulator due to its flexibility as it can deliver up to 10A and the output voltage can be adjusted. Want to know more? Read all about it in their new community post! #pcb #hardware

always remember to order a stencil with your PCBs! I tried smearing paste on the board here, but the results were blobby 🤰 (if you get your PCBs from @aisler.net, use NNNI26 for €10 off year-round! 😳)

Did you know that you can collect store credit through our 'Rifty Reward' programme? The only limit is the sky, so how much store credit have you collected so far? 👀 Don't know the Rifty Reward yet? Head over here: community.aisler.net/t/rifty-rewa...