Post

Alright folks here's a snapshot of a small part of the radio sky to started off a little thread about observing with the CSIRO's #ATCA telescope 🧵 #radioastrophysics #radioastronomy #astronomy #radio #telescope

Most observations used to be conducted from CSIRO ATNF HQ but since COVID remote observing has become the norm. We use SSH tunnels - basically secure connections between my computer and the control room computer - to remotely control the telescope #ssh #remotework #virtual

Once connected the 1st step is to calibrate the #radiotelescope array. This involves observing well-known sources of #radio light which are bright and don't change too much. We also need to calibrate the #signals between the 6 different dishes of the array 📡 📡 📡 📡 📡 📡

Calibrations are critical because the #radio waves are arriving at each #antenna at a slightly different time, which would lead to garbage #data if we didn't correct for it 🗑️ The colours show us the signal between a pair of radio antennas and how their amplitudes, phases, and delays line up 🏳️‍🌈

This takes 10-30 mins (depending on observing conditions) and if everything works you should get mostly flat #signals for each baseline (pair of dishes) across all of the channels in your band - the frequency range you're observing. This is what it looks like for a calibrator source at 5.5 GHz

This was the #desksetup I used to have when I originally wrote this thread. Baby Yoda always helped me debug any issues I come across 🥹🐸

Some frequency bands, like the low 1.4 GHz pictured here, have LOTS of noise in the signal. This is because of #RFI (radio frequency interference) from other human-made devices and broadcasts. So turn off your📱 if you're visiting a radio #telescope site 🤫 #radioastronomy

Using a schedule file (prepared before observing) to instruct the #telescope, we look at a nearby calibrator source before AND after each observation of the #science target. This helps us take the changing #atmospheric conditions into account when you analyse the data later 🌌👨‍💻 #DataScience

During the observation the #ATCA signal tends to look very noisy but this is totally normal👌 In the data reduction and analysis stage we calibrate the #data accordingly and the astronomical object of interest *should* come out clearly in the final image 🤞😅 #radioastronomy